Connecting The Accessories - Clarion CZ100 Owner's Manual & Installation Manual

Front Right
Front Left
Rear Right
Rear Left
4-Speaker system
or
2-Speaker system
Front Right
Front Left
Not used.
Insulate each wire

8) Connecting the accessories

• Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
+ Gray
- Gray/Black
+ White
- White/Black
Yellow wire (Memory back-up lead)
+ Purple
- Purple/Black
+ Green
Red wire (Power lead)
- Green/Black
Blue/White wire (Amplifier turn-on lead)
Black wire (Ground lead)
+ Gray
- Gray/Black
Orange/White wire (Illumination lead)
+ White
- White/Black
+ Purple
Blue wire (Auto antenna lead)
- Purple/Black
+ Green
- Green/Black
16-Pin Connector Extension Lead 16-Pin Connector Extension Lead
(attched to the source unit)
(attached to the source unit)
Brown wire (Phone mute lead)
Connect to cellular phone mute lead.
Connect directly to battery
Accessory + 12V
Connect to remote turn-on lead of amplifier
Connect to vehicle chassis ground
Connect it to the car power supply terminal
for illumination
Connect it to the car power supply terminal
for antenna
23