Orisec CT-10 User Manual page 28

Log Event
Low Battery Alarm XX
Low Battery Restore XX
Omit Key Active XX
Omit Key Restore XX
Keyswitch Active XX
Keyswitch Restore XX
Security Key Active XX
Security Key Restore XX
Alarm Active
Bells Active
Re-arm Lockout Zone
Confirmed Alarm
Confirmed PA Alarm
Remote Access XX
User XX
Access XX
Duress XX
User Tag XX
User Remote XX
User XX Lockout
User Tag XX Lockout
Code Tamper X
Userr XX DELETED
Exit Started XX
Exit Started Timer X
Exit Started Zone XX
Exit Stopped
Exit Failed by zone XX
Entry Started XX
Entry Timeout
System Armed
Keyswitch Arm
Quick Armed
Part Armed 1
Part Armed 2
28
Description
Low battery alarm from wireless device on zone XX.
Low battery alarm on zone XX has restored.
Key omits activated by zone XX.
Key omits by zone XX has restored.
Keyswitch connected to zone XX is active.
Keyswitch connected to zone XX has restored.
Security keyswitch connected to zone XX is active.
Security keyswitch connected to zone XX has restored.
Intruder Alarm is active.
Bell output is active.
Re-arm lockout has occurred and no more alarms can be generated for
the armed period.
Confirmed alarm generated (two different zones activated).
Confirmed PA alarm generated.
Remote access via PC number XX.
User access by user XX.
Access user code type by user XX.
Duress alarm by user XX.
User XX proximity tag access.
User XX wireless remote has accessed the system.
User XX has been locked out from using the system.
User XX proximity tag has been locked out from using the system.
Code tamper (invalid code) generated at keypad X.
User XX deleted from the system.
Exit mode started by user XX.
Exit mode started by control timer X.
Exit mode started by zone XX.
Exit mode stopped.
Exit mode failed by zone XX.
Entry mode stared by zone XX.
Entry timeout alarm.
System armed.
Keyswitch Armed.
Quick Armed.
Part armed 1.
Part armed 2.