Driver Installation; Installing The Driver Under Windows - ZLG USBCANFD Series Product User Manual

USBCANFD-200U/100U
USBCANFD Series CANFD Interface User Manual

3. Driver Installation

This document uses a PC running Windows 7 as an example to describe how to install the USBCANFD-200U
(100U) driver.

3.1 Installing the Driver under Windows

Connect the USBCANFD-200U (100U) interface card to the computer with a USB cable, and ensure that the
device is powered properly.
Right-click [Computer] and choose [Properties] (as shown in Figure 3.1) to start the Device Manager. Before
the driver is installed, the Device Manager is displayed, as shown in Figure 3.2. If the device manager does not
display the message, check that the USB cable is connected correctly, the USB port of the computer is disabled,
and the PWR indicator is on.
Figure 3.1 Staring the computer device manager
8
©2021 Guangzhou ZLG Electronics Co., Ltd.
User Manual