Driver Installation; Installing The Driver Under Windows - ZLG USBCANFD Series User Manual

Hide thumbs Also See for USBCANFD Series:
Table of Contents

Advertisement

USBCANFD-100U-mini
USBCANFD Series CANFD Interface Card User Manual

3. Driver Installation

This document uses a PC running Windows 7 as an example to describe how to install the
USBCANFD-100U-mini driver.

3.1 Installing the Driver Under Windows

Connect the USBCANFD-100U-mini interface card to the computer with a USB cable to ensure that the
device is powered properly.
Right-click [Computer] and choose [Properties] (as shown in Figure 3.1) to open the Device Manager. Before
the driver is installed, the device manager is displayed, as shown in Figure 3.2. At this time, if the device manager
does not display the message, check whether the USB cable is connected correctly, whether the USB port of the
computer is disabled, and whether the device indicator SYS is on (red indicator at this time).
Figure 3 Starting the computer device manager
Figure 3.2 Starting the computer device manager
©2021 Guangzhou ZLG Electronics Technology Corp.,Ltd.
8
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usbcanfd-100u-mini

Table of Contents