EN50636-2-100: Avoid body contact with earthed or grounded Model UB101D surfaces, such as pipes, radiators, ranges and Work mode: operation without load refrigerators. There is an increased risk of elec- Vibration emission (a ) : 2.5 m/s...
Use personal protective equipment. Always Disconnect the plug from the power source wear eye protection. Protective equipment such and/or remove the battery pack, if detachable, as a dust mask, non-skid safety shoes, hard hat or from the power tool before making any adjust- hearing protection used for appropriate conditions ments, changing accessories, or storing power tools.
If the machine is damaged, ask It is an employer's responsibility to enforce Makita Authorized Service Centers for repair. the use of appropriate safety protective equip- 16. Do not insert fingers or other objects into ments by the tool operators and by other per- suction inlet or blower outlet.
If the parts are worn or damaged, replace them rain. Water entering the tool will increase the risk with parts provided by Makita. of electric shock. Store the machine in a dry place out of the reach of children.
Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. 7 ENGLISH...
Optional accessory for UB100D Optional accessory for UB100D / UB101D Align the protrusions on the garden nozzle with the Install the long nozzle in the same way as the nozzle. To grooves on the main unit, then insert the garden nozzle remove the long nozzle, perform the installation proce- into the main unit, and then turn it to lock it into place.
Installing or removing the dust bag FUNCTIONAL Optional accessory for UB100D / UB101D DESCRIPTION Align the protrusions on the joint of dust bag with the grooves on the main unit, then insert the joint into the main unit, and then turn it to lock it into place.
Battery protection system Switch action The machine is equipped with a battery protection WARNING: Before installing the battery car- system. This system automatically cuts off power to the tridge into the machine, always check to see that motor to extend battery life. the switch trigger actuates properly and returns The machine will automatically stop during operation if to the "OFF"...
For UB101D Number Speed High Medium NOTICE: When turning the dial, be sure to com- pletely release the switch trigger. Otherwise, the machine may be damaged. OPERATION CAUTION: Do not place the machine on the ground while it is switched on. Sand or dust may enter from suction inlet and cause a malfunction or personal injury.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 12 ENGLISH...
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the man- ual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.