Sleep Timer; Tilt Function - Dyson Hot+Cool AM09WH Operating Manual

Sleep timer

To set the sleep timer, press and hold the timer button
to select the desired time. When time reaches zero, the
appliance will go into standby mode. To cancel, reduce
the time until two dashes appear.
Diffused and focused modes
Diffused mode
Press the wide angle
button to change from a
personal directed airflow
to a whole room airflow.
Heating and cooling modes
work in this mode.
Focused mode
Press the narrow angle
button to change from a
whole room airflow to a
personal directed airflow.
Heating and cooling modes
work in this mode.

Tilt function

Carefully hold the base and the main body. Tilt the amplifier
forward or backward for the required airflow angle.
Oscillation and airflow speed control
Oscillation control
To start the appliance
oscillating, press the
oscillation control button.
To stop the appliance
oscillating, press it again.
The appliance will not
oscillate when the control
buttons are pressed.
Airflow speed control
To change the airflow
speed press the airflow
control button. The digital
display will show the new fan
speed. If in heater mode after
2.5 seconds it will change
back to displaying the target
temperature.
7