Troubleshooting - Konig BTRC100BK Manual

A connection is automatically established if the BTRC100BK is powered.
If you want to switch from one device to another, follow the steps below:
1. End the existing Bluetooth® connection.
2. The BTRC100BK is now ready to be connected to another device.
3. Follow the instructions "Pairing the BTRC100BK" to connect the new device.
LED indication
Indication
Flash every 5 seconds
Constantly switched on Connected

Troubleshooting

If you do not hear any sound coming from your speakers, check the following:
- make sure the BTRC100BK is powered;
- make sure the audio cable is properly connected to the BTRC100BK;
- make sure the volume is correctly set;
- make sure the devices are at a maximum distance of 10 metres of the audio
transmitter;
- make sure the Bluetooth® function on your device is activated;
- make sure that there is music playing on your device.
Meaning
Pairing
3
Description
Searching the device in pairing
mode/waiting for a connection
BTRC100BK and device are
connected