Declination Drift Method Of Polar Alignment - Celestron 11074-XLT Instruction Manual

Declination Drift Method of Polar Alignment

This method of polar alignment allows you to get the most accurate alignment on the celestial pole and is required if you want to do long exposure
deep-sky astrophotography through the telescope. The declination drift method requires that you monitor the drift of selected stars. The drift of
each star tells you how far away the polar axis is pointing from the true celestial pole and in what direction. Although declination drift is simple
and straight-forward, it requires a great deal of time and patience to complete when first attempted. The declination drift method should be done
after any one of the previously mentioned methods has been completed.
To perform the declination drift method you need to choose two bright stars. One should be near the eastern horizon and one due south near the
meridian. Both stars should be near the celestial equator (i.e., 0° declination). You will monitor the drift of each star one at a time and in
declination only. While monitoring a star on the meridian, any misalignment in the east-west direction is revealed. While monitoring a star near
the east/west horizon, any misalignment in the north-south direction is revealed. It is helpful to have an illuminated reticle eyepiece to help you
recognize any drift. For very close alignment, a Barlow lens is also recommended since it increases the magnification and reveals any drift faster.
When looking due south, insert the diagonal so the eyepiece points straight up. Insert the cross hair eyepiece and align the cross hairs so that one is
parallel to the declination axis and the other is parallel to the right ascension axis. Move your telescope manually in R.A. and DEC to check
parallelism.
First, choose your star near where the celestial equator and the meridian meet. The star should be approximately within 1/2 an hour of the
meridian and within five degrees of the celestial equator. Center the star in the field of your telescope and monitor the drift in declination.

If the star drifts south, the polar axis is too far east.

If the star drifts north, the polar axis is too far west.
Make the appropriate adjustments to the polar axis to eliminate any drift. Once you have eliminated all the drift, move to the star near the
eastern horizon. The star should be 20 degrees above the horizon and within five degrees of the celestial equator.

If the star drifts south, the polar axis is too low.

If the star drifts north, the polar axis is too high.
Again, make the appropriate adjustments to the polar axis to eliminate any drift. Unfortunately, the latter adjustments interact with the prior
adjustments ever so slightly. So, repeat the process again to improve the accuracy checking both axes for minimal drift. Once the drift has been
eliminated, the telescope is very accurately aligned. You can now do prime focus deep-sky astrophotography for long periods.
NOTE: If the eastern horizon is blocked, you may choose a star near the western horizon, but you must reverse the polar high/low error
directions. Also, if using this method in the southern hemisphere, the direction of drift is reversed for both R.A. and DEC.
32