Table of Contents
Advertisement
Using the selection key (short press), you can navigate between the source
selection and the volume control. The editable option is displayed on a white
background. On the other hand, the VOL or SEL indicator will be framed and
blinking when this option is selected.
Volume control (VOL): turn the rotary encoder to change the volume of the
zone indicated on the control. Changes are applied in real time.
MUTE: press and hold the encoder for 2 seconds to enable/disable the
MUTE function in this zone.
Source selection (SEL): turn the encoder to scroll through the different
available sources*. No changes are made during scrolling. The name
corresponding to each source will start flashing. Press the encoder to select
the desired source and apply the change. After a few seconds without
selecting a source, the previous state is restored without any change being
The HANGAR application determines available sources (see the HUB web
applied.
*
application manual for more information).
6.2 Equalization screen
The equalization screen is accessed by holding down the select key for 2 seconds.
Once on this screen, press the selection key (short press) to navigate between the
different tone controls, and adjust them as desired using the rotary encoder.
You can return to the main screen by pressing the selection key for 2 seconds.
After a few seconds without activity in this screen, the main screen returns
automatically.
Figure 4: equalization screen
9
Treble Control
Middle Control
Bass Control
Advertisement
Table of Contents
