Table of Contents
Advertisement
1
1.
3.
4.
5.
Figure 1: eMCONTROL1 + WPaMIX-T connection diagram
eMCONTROL1 to an HUB unit depend on the AWG category of the cable used.
Note:
the maximum lengths for CAT5 cable or better connecting an
Examples:
eMCONTROL1
eMCONTROL1 +
WPaMIX-T
If the cable is too long, eMCONTROL1 may work properly but noise will be
superimposed on the signal entering the WPaMIX-T. The solution to this possible
24VDC power supply. The digital data exchange between the HUB unit and the
problem is to supply the eMCONTROL1 digital control with an external
eMCONTROL1 unit, using external power supply and good quality CAT5E cable,
has been successfully tested with a wiring distance of 600 meters.
eMCONTROL1
AWG24 Cable
Max. length
270 meters
Max. length
85 meters
7
WPaMIX-T
Euroblock
connector
AWG23 Cable
Max. length
340 meters
Max. length
105 meters
1
1. Bal Audio Input: + Terminal
3
3. Bal Audio Input: − Terminal
4
4. Power Supply Input: − Terminal
5
5. Power Supply Input: + Terminal
AWG22 Cable
Max. length
425 meters
Max. length
130 meters
Advertisement
Table of Contents
