Table of Contents
Advertisement
CDD
USER GUIDE
First remove the four screws using a 4 mm hex key (CDD6/8) or a 5 mm hex key (CDD10/12).
Align the bracket with the fixing holes and screw securely in place using the same screws.
NOTE: the cabinet and bracket shown in these examples are deliberately in different colours for
reasons of clarity.
Offer the speaker up to the wall bracket; the collar on the cabinet bracket section will hook
securely in place on the spigot, freeing up both hands for final adjustment.
Horizontal (pan) adjustment is available by rotating the collar on the spigot. When you're happy
with the angle, the collar securing bolt can be tightened with an M6 hex key (CDDWB8/6) or an
M8 hex key (CDDWB10/12) to lock the position.
CDD User Guide V1.1
26
Advertisement
Table of Contents
