Sharp SJ-XE35PM Operation Manual page 16

Hide thumbs Also See for SJ-XE35PM:
Table of Contents

Advertisement

Available languages

Available languages

Controlling Temperature
The refrigerator controls its temperature automatically. However, you can adjust the temperature in 5 levels.
How to check the current temperature
level
The indicator will be "ON " to show the current temperature
level by pressing "R" or "F" button.
Refrigerator compartment : Press "R" button.
Freezer compartment
Setting of Refrigerator / Freezer
compartment
Refrigerator compartment
1.
Press "R" button.
2.
Press "R" button to change the temperature level.
Freezer compartment
1.
Press "F" button.
2.
Press "F" button to change the temperature level.
Advanced Setting of Refrigerator /
Freezer compartment
The temperature of refrigerator compartment and freezer compartment
can be adjusted in 9 levels (level 1 ~ 9) by following steps.
Refrigerator compartment
1.
Press "R" button first. Hold down "R" button and then press
"Express freezing" button for 3 seconds or more.
The indicator will return to "Factory setting".
2.
Press "R" button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
Freezer compartment
1.
Press "F" button first. Hold down "F" button and then press
"Express freezing" button for 3 seconds or more.
The indicator will return to "Factory setting".
2.
Press "F" button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
16
: Press "F" button.
Beep
Beep
Beep beep beep
Beep beep beep
• Temperature indicator changes as the pictures below
(3→4→5→1→2→3) in each case (Refrigerator compartment
/ Freezer compartment) by pressing "R" or "F" button.
Level
1
2
3
<Factory setting>
4
5
NOTE
• At first, both compartments are set at "Factory setting".
• After adjusting the temperature level, the indicator will turn
off approximately 5 seconds later.
• When the operation of refrigerator stops because of power
failure, temperature setting is restarted from the previous
setting at the time of re-power.
• Temperature indicator changes as the pictures
below (5→6→7→8→9→1→2→3→4→5) in
each case (Refrigerator compartment / Freezer
compartment) by pressing "R" or "F" button.
...
OFF
Level
1
2
3
4
5
<Factory setting>
6
7
8
9
Indicator
...
...
Lighting
Flashing
Indicator

Advertisement

Table of Contents
loading

Table of Contents