Turning Off The Image Stabilizer; Demonstration Mode - Canon MVX30 Instruction Manual

Turning Off the Image Stabilizer

The image stabilizer compensates for camcorder shake even at full telephoto. It tries
to compensate for horizontal movements; therefore, you may decide to turn it off
when you mount the camcorder on a tripod.
CAMERA
CAMERA SETUP
( 35)
Open the menu and select [CAMERA SETUP]. Select [IMG STAB i], set it
to [OFF] and close the menu.
"i" disappears.
❍ The image stabilizer cannot be turned off when the program selector is set to
.
❍ The image stabilizer is designed to compensate a normal degree of camcorder
shake.
❍ The image stabilizer might not be as effective when using the night modes.

Demonstration Mode

The demonstration mode displays the camcorder's main features. It starts
automatically when you leave the camcorder turned on without loading a recording
media for more than 5 minutes. However, you can set the camcorder not to start the
demonstration mode.
CAMERA
DISPLAY SETUP/
( 35)
Open the menu and select [DISPLAY SETUP/
it to [OFF] and close the menu.
To cancel the demo mode once it has begun, press any button, turn off the
camcorder or load a recording media.
PLAY (VCR)
PLAY (VCR)
CARD CAMERA
IMG STAB •••ON
CARD CAMERA
DEMO MODE••••ON
]. Select [DEMO MODE], set
CARD PLAY
CARD PLAY