Using A Household Power Source; Power Adapter - Canon MVX30 Instruction Manual

Using a Household Power Source

1. Turn the POWER switch to OFF.
2. Connect the power cord to the

power adapter.

3. Plug the power cord into a power
outlet.
4. Connect the power adapter to the
camcorder's DC IN terminal.
❍ Turn off the camcorder before connecting or disconnecting the power adapter.
❍ If the adapter is used close to a TV, it may cause picture interference. Move the
adapter away from the TV or the aerial cable.
❍ Do not connect any products that are not expressly recommended to the
camcorder's DC IN terminal or to the power adapter.
❍ You may hear some noise from the power adapter during use. This is not a
malfunction.
❍ Do not disconnect and reconnect the power cord while charging a battery
pack. Charging may stop. The battery pack may not be charged correctly even
if the CHARGE indicator glows steady. The battery pack may also not be
charged correctly when a power outage occurs during charging. Remove the
battery pack and attach it back to the camcorder.
❍ When the power adapter or battery pack is defective, the CHARGE indicator
flashes rapidly (at about 2 flashes/second) and charging stops.
❍ The CHARGE indicator informs you about the charge status.
0-50%:
More than 50%: Flashes twice every second
100%:
Flashes once every second
Glows steadily