Other Camcorder Settings - Canon MVX30 Instruction Manual

Other Camcorder Settings

Beep
You will hear a beep upon camcorder operations such as power on/off, start/stop, self-
timer countdown, and unusual conditions of the camcorder.
If you turn off the beep, all camcorder sounds including the ones of the My Camera
settings will be turned off.
CAMERA
SYSTEM
( 35)
To turn the beep off, open the menu and select [SYSTEM]. Select [BEEP],
set it to [OFF] and close the menu.
Turning Off the Tally Lamp
The tally lamp indicates that the camcorder is recording, receiving signals from the
wireless controller or counting down for the self-timer. However, the flashing may be
reflected in the lens when recording close-ups or through glass, and you may
therefore decide to turn it off.
CAMERA
SYSTEM
( 35)
Open the menu and select [SYSTEM]. Select [TALLY LAMP], set it to [OFF]
and close the menu.
The tally lamp still lights up when the camcorder receives a signal from the wireless
controller, or during self-timer countdown.
Adjusting the Brightness of the LCD Screen
CAMERA
DISPLAY SETUP/
( 35)
Open the menu and select [DISPLAY SETUP/
adjust the brightness level and close the menu.
Changing the brightness of the LCD screen does not affect that of the viewfinder
or the recordings.
PLAY (VCR)
PLAY (VCR)
PLAY (VCR)
CARD CAMERA
BEEP•••••••••ON
CARD CAMERA
TALLY LAMP•••ON
CARD CAMERA
BRIGHTNESS•••
–
]. Select [BRIGHTNESS],
CARD PLAY
CARD PLAY
CARD PLAY
+