Configuration Of Transmission Channels - Prodipe M850 MK2 Micro User Manual

• M850 Microphone (M850 DSP Solo et M850 DSP Duo and M850 MK2):
1. Microphone unit and wire mesh cover.
2. LCD display.
3. ON | MUTE | OFF Switch: ON | MUTE | OFF.
4. Power supply and synchronization tell-tale light.
5. Battery compartment LR6 / AA (x2).
6. Receiver [IR] for pairing.

Configuration of transmission channels

Transmission channels are configured automatically (only on M850 Solo and M850 Duo). Hold the
hand microphone (IR cell at the base of the microphone with battery cover removed) facing the
receiver (IR cell in the middle of the front panel). Switch hand microphone to "ON" for perform this
operation (see following diagram).
Note:
• M850 Microphone: IR cell at the base of the microphone under the battery cover.
• B210 Bodypack: IR cell on front of bodypack.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
Page 17