Hornbach 10476778 User Manual page 201

2x attach base to the column
Slide the base cover (I) with its
wide opening facing outwards
on to the straight end of the
column (A). Push the base
(J) into the straight end of
the column. It only fits in one
position. In doubt please rotate
it until it fits easily. Fix the base
with 6 screws (O).
2x attach front beam
to the column
Push the front beam (B1) on to
the column (A) in such a way,
that the slot nuts of the beam
(silvery metal pins) interlock with
the slots in the column.
1
(O) (O)
2
(B1) (B1)
(A) (A)
(A) (A)
(A) (A)
(J) (J)
(B1) (B1)
(I) (I)
(A) (A)
ENGLISH | 201