Buffalo HD-CXT1.0TU2 User Manual page 8

4
5
Step through the wizard to reset your drive.
You will not be able to undo this. After a reset, all data on the drive will be lost.
6
When "The hard disk status is now reset to the factory defaults" is displayed, click [OK].
The reset is now complete. Wait until the hard drive is recognized. If it is not recognized, unplug the hard
drive and reconnect it.
Click [Reset to the factory defaults].
Click [Next].
All data saved on the drive will be erased!
HD-CXTU2 User Manual
7