Buffalo HD-CXT1.0TU2 User Manual page 5

* Booting your PC from the Drive Station is not supported.
* Do not lean any object against this unit. It may cause the unit to malfunction.
* If you use this unit with Windows 7, Vista, or XP on a computer with a USB 1.1 port, you may receive
a message indicating that a high-speed USB hub is connected to a non high-speed USB device. To
continue, click [X].
* You may hear some noise while this unit is working, especially while booting or being accessed. This
is normal.
* Always refer to the manuals for your computer and peripheral devices.
* You cannot boot an OS from this unit.
* Do not lean any object against the DriveStation. It may cause the unit to malfunction.
* When the driver for this unit is installed, devices are added to Device Manager.
To display Device Manager, follow the instruction below:
Windows 7/Vista/Server 2003/Server 2003 R2/Server 2008/Server 2008 R2
Windows XP .............................................Click [Start] and right-click [My Computer].
OS
Windows 7/Vista/XP
Server 2003
Server 2003 R2
Server 2008
Server 2008 R2
4
HD-CXTU2 User Manual
......................Click [Start], right-click [Computer], and click [Manage]. When "A program
needs your permission to continue" is displayed, click [Continue] or [Yes] and
then [Device Manager].
Click [Manage] and then [Device Manager].
Location to be added
Universal Serial Bus controllers
Disk drives
DVD/CD-ROM Drives
Device name to be added
USB Mass Storage Device
BUFFALO HD-CXTU2 USB Device
BUFFALO Virtual CD ROM USB Device