Mitsubishi Electric GB-50ADA-J Instruction Book page 13

Item
Operation mode display
Set temperature display
Room temperature
display
(4) General equipment group operation condition
ON
Note: Other than lighting icons, pump or card key icons are also available.
Note: When connecting multiple AG-150A controllers by connecting an Expansion Controller to the
system, "Schedule set" and "Schedule Not Available" will be displayed only on the AG-150A
controller that is executing these functions.
(5) HWHP (CAHV) group operation condition
ON
Schedule set
Note: When connecting multiple AG-150A controllers by connecting an Expansion Controller to the
system, "Schedule set" and "Schedule Not Available" will be displayed only on the AG-150A
controller that is executing these functions.
The operation mode is displayed here.
The set temperature is displayed here.
Note: The water temperature setting will be displayed for the Air To Water (PWFY) group.
Note: The temperature display can be in either Celsius (°C) or Fahrenheit (°F) depending on the
setting.
The temperature of the indoor unit's intake is displayed here.
Note: Because the temperature displayed here is of the indoor unit's intake, it could be different from
the actual room temperature.
Note: The current water temperature will be displayed for the Air To Water (PWFY) group.
Note: The temperature display can be in either Celsius (°C) or Fahrenheit (°F) depending on the
setting.
Description
OFF Error
OFF Error
Schedule Not
Available
12
Schedule Not
Schedule set
Available