Changing The Temperature - Toshiba RBC-AMSU51-ES Owner's Manual

 Changing the temperature
▼ When dual automatic mode
In dual set point setting, the temperature set point of individual cooling and heating can be set to adjust the indoor
temperature.
Thermo.OFF for temperature range between the temperature set points for cooling and heating.
If you wish to use the dual automatic mode, ask your dealer to set the setting.
Room A
24
20
Auto
Mode Fan Speed
Room A
28
Cool
22
Heat
Return Fix
Cool Heat
Room A
28
Cool
22
Heat
Return Fix
Cool Heat
NOTE
When connecting to an air conditioning control system which does not support dual set point
• The temperature set point, a value half the heating temperature and Cooling temperature set point will be displayed.
• When temperature setting has been changed by the unsupported controller, the cooling temperature set point and
heating temperature set point displayed on the dual set point screen will be set automatically.
• For details, contact the dealer where you purchased the air conditioner.
12:00
12:00
12:00
1
Push the [
the temperature.
Push the [
temperature setting, push the [
to lower it.
• Refer to "Set temp. range limit" for the
temperature range available. (page 31)
• The temperature cannot be adjusted when
"Fan" is selected as the operation mode.
1
Push the [
to the display shown on the left.
2
To set the cooling temperature set point,
push [Cool] and adjust the setting with
∧
[ ] / [
A box will surround [
[Temperature set point]. To set the heating
temperature set point, push [Heat] and
adjust the setting with [
A box will surround [
[Temperature set point].
Push [ MENU] to confirm the settings and
return to the normal display.
Push [ CANCEL] to cancel the settings and
return to the normal display.
– 8 –
Owner's Manual
∧ ∨
] / [ ] button to adjust
∧
] button to raise the
∨
] button
∧ ∨
] / [ ] button to switch
∨
].
Cool] and
∧
] / [
Heat] and
∨
].
EN