Toshiba RBC-AMSU51-ES Owner's Manual page 6

Switching between the normal display and detailed display
Push and hold the [
to switch the display mode.
The normal display mode is selected as a factory default setting.
Normal display mode (factory default)
28
Cool
Mode Fan Speed
Detailed display mode
Room A
24
Cool
Mode Fan Speed
▼ Icon list
Shows the Energy saving operation is
activated.
(page 28)
Shows the remote sensor is activated. (*2)
Shows the Night operation is activated.
(page 25)
Shows the central control device prohibits the
use of the remote controller (page 47)
Shows the saving operation is activated.
(page 33)
*2 Normally the temperature sensor of the indoor unit senses the temperature. The temperature around the remote control can
also be sensed. For details, contact the dealer where you purchased the air conditioner. * Do not use the function when the
air conditioner is controlled in a group.
CANCEL] button and [
(*1)
Energy saving icon
12:00
• Displayed when performing the power saving operation of the air
conditioner.
Soft cooling icon
• Shows the air conditioner is performing the soft cooling operation.
Saving icon
• Displayed when performing operation by suppressing excessive heating
or excessive cooling through automatic correction of the temperature set
point.
(*1)
12:00
Icons appear on the screen when the detailed display mode is selected.
*1 • The "
• It may be displayed depending on the model when "
MONITOR] button at the same time for more than 4 seconds
Preparing to heat" icon appears when the heating operation
starts or when defrosting operation.
The indoor fan stops or the operation becomes the blowing operation
when it is displayed.
operate" is displayed.
Shows a timer function is activated.
(page 19, 21)
Shows the Louver lock is activated.
(page 18)
Shows the setting of the louver.
(page 13, 14)
Shows the filter needs to be cleaned.
!
(page 26, 48)
Shows soft cooling is activated.
(page 41)
Shows operation switching control is in
progress.
– 5 –
Owner's Manual
Preparing to