Table of Contents
Advertisement
It is important to assess the fall of the
bath rim and position the wall profile
so that any water runs off into the bath
and does not pool on the bath rim
Determine the hand of the screen and
insert the top & bottom plugs into the glass
profile and making sure the glass gasket is
in place, affix the bottom hinge using 2 of
the 30mm M4 screws.
With the curved face of the wall profile facing
outwards, use the spirit level to ensure wall
profile is plumb, mark screw holes then drill
the wall with the 8mm masonry bit, plug and
affix the wall profile using 3x 60mm M5
screws
Advertisement
Table of Contents
