Kenwood Remote Application - Kenwood KMM-BT407DAB Instruction Manual

KENWOOD Remote Application

You can control the KENWOOD car receiver from the following device using
KENWOOD Remote application.
For : iPhone/iPod touch (via Bluetooth or via USB input
terminal) or Android device (via Bluetooth)
For /
• For more information, visit <http://www.kenwood.com/cs/ce/>.
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting.
Start using KENWOOD Remote application
1 Start up the KENWOOD Remote application on your device.
2
Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page 18)
• For iPhone/iPod touch:
Connect iPhone/iPod touch to the USB input terminal. (Page 12)
(or)
Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 18)
(Make sure the USB input terminal is not connected to any device.)
3 Select the device to use from the [FUNCTION] menu.
See the following "Settings to use KENWOOD Remote application".
For : By default, [ANDROID] is selected. To use iPhone/iPod
touch, select [YES] for [IOS].
• For : "R.APP" indicator lights up when KENWOOD Remote
application is connected.
Settings to use KENWOOD Remote application
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
(for
: Android device (via Bluetooth)
/ /
3
Repeat step 2 until the desired item is selected/activated.
4 Press and hold to exit.
To return to the previous setting item, press
[REMOTE APP]
[SELECT]
For
Selects the device ([IOS] or [ANDROID]) to use the application.
[IOS] [YES]: Selects iPhone/iPod touch to use the application via Bluetooth or
connected via USB input terminal. ; [NO]: Cancels.
If [IOS] is selected, select iPod BT source (or iPod USB source if your iPhone/iPod
touch is connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the
USB input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID] [YES]: Selects Android device to use the application via Bluetooth. ; [NO]: Cancels.
[ANDROID Selects the Android device to use from the list.
LIST] • For
to [YES].
[STATUS] Shows the status of the selected device.
[IOS CONNECTED]: You are able to use the application using the iPhone/iPod
touch connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]: No iOS device is connected to use the application.
[ANDROID CONNECTED]: You are able to use the application using the Android
device connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is connected to use the
application.
)
.
:
: Displayed only when [ANDROID] of [SELECT] is set
ENGLISH
Default: [XX]
17