Input Signal Settings - Signal Menu - Epson EB-U42 User Manual

Input Signal Settings - Signal Menu

Normally the projector automatically detects and optimizes the input signal
settings. If you need to customize the settings, you can use the Signal menu.
The available settings depend on the currently selected input source.
You cannot select settings on the Signal menu when the current input
a
source is one of the following:
• USB Display
• USB
• LAN
• Screen Mirroring (EB‑U42)
You can restore the default settings of the Tracking, Sync., and
a
Position settings by pressing the [Auto] button on the remote control.
To change settings for an input source, make sure the source is connected and
select that source.
Setting Options
Resolution Auto
Wide
Normal
Description
Sets the input signal resolution if not
detected automatically using the Auto
option.
Setting Options
Aspect See the list of
available aspect
ratios.
Tracking Varying levels
available
Sync. Varying levels
available
Position —
Auto Setup On
Off
Overscan Auto
Off
4%
8%
Advanced HDMI Video
Range
Input Signal
102
Description
Sets the aspect ratio (width-to-height
ratio) for the selected input source.
Adjusts the signal to eliminate vertical
stripes in computer images.
Adjusts the signal to eliminate fuzziness
or flickering in computer images.
Adjusts the image location on the screen.
Automatically optimizes computer image
quality (when On).
Changes the projected image ratio to
make the edges visible by a selectable
percentage or automatically.
HDMI Video Range: sets the video
range to match the setting of the device
connected to the HDMI port.
• Auto: detects the video range
automatically.
• Normal: normally for images from a
device other than a computer; can also
be selected if the black areas of the
image are too bright.
• Expanded: normally for images from a
computer; can also be selected if the
image is too dark.
Input Signal: specifies the signal type
from the input sources connected to the
computer ports.
• Auto: detects signals automatically.
• RGB: inputs computer/RGB video
signals.
• Component: inputs component video
signals.