Belkin F9K1102V2 User Manual page 32

3) The printer may not be set to auto‐connect. Via the Belkin
Router Manager, open the USB Print and Storage Center.
Check that the printer appears in the list of available devices.
View the properties of the printer, and check that "auto‐
connect" is selected.
A different sort of USB device that I plugged into the USB port is not showing up
on my computer.
Most USB devices other than disks and printers must be
accessed via the USB Print and Storage Center.
1) Is the light on over the USB port that the device is plugged
into? If not, try unplugging and re‐plugging the device. Please
check that the USB connector is firmly plugged into the
Router.
2) Via the Belkin Router Manager, open the USB Print and
Storage Center. Check that the device appears in the list of
available devices.
3) Select the device and click the "Use" button. The device will
be virtually connected to your computer until you choose to
"Stop Using" the device, or another person requests use of the
device.
Technical Support
US
http://www.belkin.com/support
UK
http://www.belkin.com/uk/support
Australia
http://www.belkin.com/au/support