Belkin F9K1102V2 User Manual page 13

2. Select your wireless network from the list. If asked, enter your
network password (network key).
Windows Vista® and Windows XP
Your device provides a menu of available wireless networks at the
right end of the task bar.
1. Right-click on the icon that shows a computer with wireless
waves (XP) or two computers (Windows Vista).
2. Choose "View Available Wireless Networks (XP)" or "Connect to a
network (Vista)" from the menu.
3. Select your wireless network from the list. If asked, enter your
network password (network key).
Adding USB Devices
[USB INVITATION DIAGRAM (TBD)]
Adding a Drive
You can share a USB hard drive or flash drive to your network via
your Router's USB port. Once connected, you can share files and
music with other computers and devices within your network.
Plug your USB hard drive into the USB port on the back of your
Router. When the light above the USB port is lit, your drive is
available to computers on your network.
You can manually check the status of your shared drive by
visiting the USB Print and Storage Manager, found under the
Belkin Router Manager icon displayed in your system tray
(Windows) or menu bar (Mac). If you have difficulty sharing a
drive on your network, please see the "Troubleshooting"
section of this manual.
A few USB hard disks require more power than the Router's USB port provides. In these
cases, you may notice the drive failing to come on or remaining on for a short time. If