Marantz SACD 30n Owner's Manual page 12

Contents Connections
G FLASHER IN jack
Used to connect a control box, etc. (v p. 25)
H RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A Turn on the power of this unit.
B Turn off the power of this unit from the external controller.
C Check that the unit is in the standby mode.
Front panel Rear panel
Playback
u i o Q0 Q1
Remote control
unit
Settings
I REMOTE CONTROL connectors
Used to connect to a Marantz audio device that is compatible with the
remote control function. (v p. 26)
J EXTERNAL/INTERNAL switch
Turn this switch to "EXTERNAL" to operate the unit by pointing the
remote control at the amplifier connected to this unit using the remote
control connection. (v p. 26)
K AC inlet (AC IN)
Used to connect the power cord. (v p. 28)
12
Index
Tips Appendix