Network Settings - Philips BDL3260EL User Manual

• {Lock but power}: Disable all the keyboard function except the
[ ] button.
• {Lock all expect volume and power}: Disable all the keyboard
function except the [ ], [
RC lock
Choose to enable or disable the button function of the remote control.
• {Unlock}: Enable the keyboard function.
• {Lock all}: Lock all keyboard function.
• {Lock but volume}: Disable all the keyboard function except the
[ ] and [ ] button.
• {Lock but power}: Disable all the keyboard function except the
[ ] POWER button.
• {Lock all expect volume and power}: Disable all the keyboard
] [
function except the [
NOTE: T o disable the lock function from
RC lock
- item, press buttons [
remote control.
Pixel shift
For video input sources, you may choose {On} to move the screen
image automatically to protect the display from "burn-in" or "after-image"
symptoms 30 seconds after not operating the display.
Smart power
Choose a backlight level to optimise dynamic power consumption and
picture contrast.
The options are: {Off}, {Standard}, {Best Power}, {Best Picture}.
Wake on lan
Choose {On} and you can turn on the display by network.
Switch on state
Choose the display status used for the next time you connect the
power cord.
• {On} - The display will turn on when the power cord is connected
to a wall outlet.
• {Standby} - The display will remain Standby when the power cord is
connected to a wall outlet.
• {Last status} - The display will return to the previous power status
(on/off/standby) when removing and replacing the power cord.
Light sensor
Choose {On} and the display will automatically adjust backlight.
LED
Choose {Off} to turn off the indicator.
Switch on delay
Adjust the power-on delaying time (in seconds) allows a sequential
powering-on for each display by their ID number when multiple displays
are connected.
Logo
Choose {Off} and the display will not display the
you switch on.
APM
Choose {On}. Then, when no signal, the display will automatically turn
off.
] and [ ] button:
] and [ ] POWER button:
Local KB lock
or
] and 1 9 9 8 on the
logo when
Information OSD
When you press [ ] POWER button to turn on the display from
standby mode or change the input signal, the information OSD is
displayed on the upper left corner of the screen.
Choose {Off} to turn off this function.
Factory settings
Reset all your customized settings to the factory defaults.
5.3.

Network Settings

] HOME button, and go to
1. Press [
Network Settings
2. Choose
View network settings
Network settings
Static IP configuration
Digital Media Renderer - D...
Network name
Clear Internet memory
View network settings
View connected network status.
Network settings
{Network configuration}: Choose how this display should assign
addresses to the network resources.
The user can choose {DHCP & Auto IP} (suggested) or {Static IP}.
Static IP Configuration
Define {IP address}, {Netmask}, {Gateway}, {DNS1}, and {DNS2} for
this display. If {Network settings}  {Static IP} is chosen.
Digital Media Renderer - DMR
Receive multimedia files from the connected device by your network.
Network name
In the multiple-display connection, you can rename each display for easy
identification.
Use the on-screen keyboard or the remote control keypad to enter the
name.
Clear Internet memory
Clear all the cookies, bookmarks, history list and text used for auto fill.
25
BDL3260EL
Setup
menu.
and press [ ] button.