Using External Devices; Hdmi Cec; Hdmi Cec Connection Functions Of The Television - Beko B43L 5845 4B User Manual

USING EXTERNAL DEVICES

HDMI CEC

Your television is equipped with HDMI CEC
feature. This feature utilizes CEC (Consumer
Electronics Control) protocol. CEC allows you
to make an HDMI connection between your TV
and DVD player, STB or video recorder and
control such equipment with the remote control
of the television. This feature must be supported
by the device you connect as well.
Your television supports the following functions.
For detailed information about this function,
read the user manual of the external device.
HDMI CEC connection functions
of the television
Switching on the external device from
standby mode
If you switch on your external device (e.g. DVD
player) from standby mode, your television will
also be switched on from standby and switch
to the HDMI source that your television is con-
nected to.
Depending on the features of the external de-
vice (e.g. AV receiver) can start and your televi-
sion can stay on stand-by mode.
Selecting the HDMI source from the
television
When you switch on your external device (e.g.
DVD player), your television will switch to the
HDMI source that the external device is con-
nected to (your television must be on).
Selecting the menu language
When you select the menu language from your
television menu language of the external device
will change as well. (If your DVD player sup-
ports)
38 / 57 TR
---------------------------------------------------------------
Switching off the device from standby
mode
After switching your television to standby, your
external device (e.g. DVD player) will also
switch to standby if it is on.
HDMI CEC is always active on your television.
Refer to the user manual of your external device
to learn how to activate this feature on it.
Searching and selecting the active
external device
1 Press »MENU« to open the menu.
2 Select the »SETUP« menu using »
and confirm your selection with »OK«.
– The »SETUP« menu is now enabled.
Menu Language
TT Language
Audio Languages
Subtitle Language
Hearing Impaired
SETUP
PVR File System
Aspect Ratio
Blue Screen
First Time Installation
Reset
Software Update (USB)
HDMI CEC
Software Version
Move Back
3 Press » « or » « to select »HDMI CEC«
V Λ
and press »OK« to confirm.
< >
4 Use » « or » « to switch »CEC Control« to
»On« position.
– The »HDMI CEC« menu is now enabled.
5 Press »
« or » « to select the »Device
V Λ
List« and press »OK« to confirm.
– Existing devices will be searched and
displayed in the menu
6 Press » « or » « to select the device you
V Λ
want to control and press »OK« to confirm.
7 Press »EXIT« to end searching.
Television / User Manual
< >
« or » «
English
English
English
English
Off
16:9
On
Select Exit