Configuring Sequence Mode; Camera Menu - Lorex N842A82 User Manual

Hide thumbs Also See for N842A82:
Table of Contents

Advertisement

17
Using the Main Menu
3. Configure the following:
• Transparency: Select the menu transparency.
• Time Display: Check to show the time on the monitor.
• Camera Display: Check to show the channel names on the monitor.
• Image Enhance: Check for the system to digitally improve the video quality on the live
display. This setting does not affect recordings.
• AI Rule: Check to display captured faces on the right side of the live display. Face detec-
tion must be enabled on the correlating channel.
• Original Scale: Set the system to show the true aspect ratio of the cameras on the live
display. This may add black bars on the top and bottom of the image.
4. Click Apply to save changes.

17.3 Configuring Sequence Mode

Sequence mode cycles through connected channels to give you an overview of what is happen-
ing on all cameras. You can customize the order that channels appear in Sequence mode, as well
as configure which viewing modes should be used.
To configure Sequence mode:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click DISPLAY, then click the Sequence tab on the side panel.
3. Choose how many channels will appear on screen when Sequence mode is triggered by mo-
tion detection (you must check Sequence when configuring motion detection — see 12 Mo-
tion Detection, page 37for details).
4. Enter the amount of time in seconds that each channel or page will appear on screen during
Sequence mode.
5. Select a viewing mode to configure. It is recommended to start with View 1 and make your
way to View 9. By default, all viewing modes are included in the Sequence mode cycle.
6. Configure the order of channels shown on screen for each viewing mode. Uncheck channels
/ channel groups that you want to remove from the Sequence mode cycle.
7. Click Apply.

17.4 Camera Menu

The Camera Menu allows you to manage IP cameras, set recording parameters, and assign cus-
tom titles for your cameras.
#LX400113; r. 9.0/57192/57197; en-US
60

Advertisement

Table of Contents
loading

This manual is also suitable for:

N842 series

Table of Contents