Sony WH-1000XM4/S Help Manual page 75

Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM4
Listening to music from a device via Bluetooth connection
If your Bluetooth device supports the following profiles, you can enjoy listening to music and control the device from your
headset via Bluetooth connection.
A2DP (Advanced Audio Distribution Profile)
You can enjoy high-quality music wirelessly.
AVRCP (Audio Video Remote Control Profile)
You can adjust the volume, etc.
The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the
Bluetooth device.
Connect the headset to a Bluetooth device.
1
Put the headset on your ears.
2
Adjust the length of the headband.
Put the headset on your head with the
There is a tactile dot on the
A: Tactile dot
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
Adjust the volume using the touch sensor control panel of the headset.
4
Increase the volume: Swipe up repeatedly until the volume reaches the desired level.
Decrease the volume: Swipe down repeatedly until the volume reaches the desired level.
(left) mark on your left ear and the
(left) mark side.
75
(right) mark on your right ear.