GE PCS940 Owner's Manual page 9

Surface Units - Knob - Free (models PCS980)
NOTE: All protective packing must be removed from all parts. It cannot be removed if it is baked on.
Radiant Glass Cooktop
The surface unit cycle on and off to maintain your
selected control setting. This is normal.
Place your Induction designed cookware on the cooking
surface.
Turn element(s) On: Place your induction designed
cookware on the cooking surface. Touch and hold On/
Off pad about half a second. A chime can be heard with
each touch to any pad.
Power level can be selected in any of the following ways:
1. Swipe the gray arc (on the graphics) to the desired
power level. There is no sensor on the LEDs, or;
2. Touch Anywhere along the gray arc, or;
3. Touch + or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit on, touch
the + pad, or;
5. Shortcut to Low: Immediately after turning unit on,
touch the - pad.
Dual and Triple Surface Units
The surface unit has 2 or 3 cooking sizes to select
from so you can match the size of the unit to the
size of the cookware you are using.
Gray Arc Swipe Area
Lights
Gray Arc
Swipe Area
Models with a Tri-Ring
surface elemnt only.
9