GE PCS940 Owner's Manual page 29

Electric radiant slide-in ranges
Hide thumbs Also See for PCS940:
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting Tips ... Before you call for service
Problem
Power outage, clock flashes.
"Burning" or "oily" odor
emitting from the vent.
Strong odor.
F
a
n
n
o
s i
. e
My oven door glass appears
to be "tinted" or have a
"rainbow" color. Is this
defective?
Sometimes the oven takes
longer to preheat to the
same temperature.
Display flashes.
Control signals after
entering cooking time or
start time.
Oven racks are difficult to
slide.
Steam from the vent.
Warming drawer will not
work.
Excessive condensation in
the drawer.
Food dries out in the
warming drawer.
Water remaining on oven
floor after Steam Clean cycle.
"Probe" appears in the
display.
Possible Cause
Power outage or surge.
This is normal in a new oven and will
disappear in time.
An odor from the insulation around the
inside of the oven is normal for the first
few times the oven is used.
A
c
o
n
v
e
t c
o i
n
a f
n
m
a
y
a
u
o t
m
turn on and off.
A cooling fan may automatically turn on
and off.
No. The inner oven glass is coated with
a heat barrier to reflect the heat back
into the oven to prevent heat loss and
keep the outer door cool while baking.
Cookware or food in oven.
Number of racks in oven.
Different cooking modes.
Power failure.
You forgot to enter a bake temperature
or cleaning time.
The shiny, silver-colored racks were
cleaned in a self-clean cycle.
When using the ovens, it is normal
to see steam coming out of the
oven vents. As the number of racks
or amount of food being cooked
increases, the amount of visible steam
will increase.
A fuse in your home may be blown or
the circuit breaker tripped.
Controls improperly set.
Liquid in drawer.
Uncovered foods.
Temperature setting too high.
Moisture escaping.
Drawer not fully closed.
This is normal.
This is reminding you to enter a probe
temperature after plugging in the probe.
What To Do
Reset the clock. If the oven was in use, you must reset it by
pressing the Cancel/Off pad, setting the clock and resetting
any cooking function.
To speed the process, set a self-clean cycle for a minimum of
3 hours. See the Cleaning the Oven section.
This is temporary and will go away after several uses or a
self-clean cycle.
t a
c i
l a
y l
This is normal. The fan is designed to operate intermittently to
maximize cooking evenness. The convection fan will operate
during preheat of the bake cycle. The fan will turn off after the
oven is heated to the set temperature. This is normal.
This is normal. The cooling fan will turn off and on to cool
internal parts. It may run after the oven is turned off.
tint or rainbow color.
The cookware or food in the oven will cause the oven to take
longer to preheat. Remove items to reduce preheat time.
Adding more racks to the oven will cause the oven to take
longer to preheat. Remove some racks.
The different cooking modes use different preheat methods to
heat the oven for the specific cooking mode. Some modes will
take longer than others (i.e. convection bake).
Reset the clock.
Touch the Bake pad and desired temperature or the Self
Clean
pad and desired clean time.
Apply a small amount of vegetable oil to a paper towel and
spray with Pam
This is normal.
Replace the fuse or reset the circuit breaker.
Remove liquid.
Cover food with lid or aluminum foil.
Reduce temperature setting.
Cover food with lid or aluminum foil.
Push drawer in until latch engages.
Remove any remaining water with a dry cloth or sponge.
Enter a probe temperature.
or other lubricant sprays.
®
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents