Panasonic AW-UE70WP Operating Instructions Manual page 80

Web screen configurations
AGC Max Gain
When "Auto" is selected as the "Gain" setting, the
maximum gain-up amount can be set.
Setting value: 6dB, 12dB, 18dB, 24dB, 30dB, 36dB,
42dB, 48dB
Factory settings: 24dB
ND Filter
Adjust light intensity by switching between optical ND
filters that are built into the unit.
Setting value:
Auto Automatically switches ND filters depending on
the lighting conditions of the subject and shooting
location.
● This can only be configured when "Scene" is set
to "Full Auto".
Through ND filter is not used.
1/4 Reduces light intensity to 1/4.
1/16 Reduces light intensity to 1/16.
1/64 Reduces light intensity to 1/64.
Factory settings: Through
Notes
● When "Night" is selected for Day/Night, the setting is
fixed to "Through".
● When "Auto" is selected for Day/Night, you can
select either "Auto" or "Through".
● When "Auto" is selected, ND filters are switched
automatically. When filters are switched, there will be
a momentary marked change in image brightness.
● Depending on the surrounding environment and
conditions of use, filter switching may not occur as
expected even when "Auto" is selected.
Day/Night
This is used to select normal shooting or low light shooting
(by exposing the subjects to infrared rays).
For details, refer to "Contrast 2/2 screen" (page 38).
Setting value: Day, Night, Auto
Factory settings: Day
Night‑Day Level
Adjust the level used while switching from Night mode to
Day mode when Day/Night is set to "Auto".
This can only be configured when "Day/Night" is set to
"Auto".
Setting value: Low, Mid, High
Factory settings: Mid
80
(continued)
z Picture
„
Chroma Level
Set here is the color intensity (chroma level) of the
images.
Setting range: –3 to +3
Factory settings: +2
AWB
When you click the [Execute] button, this is used to
execute automatic white balance (AWB) to set the white
balance.
For details, refer to page 17.