Basic Screen [Basic] - Panasonic AW-UE70WP Operating Instructions Manual

Web screen configurations

Basic screen [Basic]

„ Priority mode tab [Priority mode]
„
Set the priority output of video.
Priority Mode
Configure the setting for the priority output of video.
Setting value:
IP Enables IP image transmission over multiple
channels. The IP transmission of H.264 images is
also supported.
SD card Inserting an SD card (optional accessory) into the
unit enables recording H.264 images to the SD
card.
The data recorded to the SD card can be played
back on the Web screen, downloaded to a
personal computer, and transferred to an FTP
server.
"Recording to and playing back from a memory
card" (page 114)
USB Enables the unit to be used as a Web camera.
The camera can also be controlled from a personal
computer.
"Web camera functions" (page 118)
IP(4K) Enables IP image transmission over multiple
channels. IP image transmission of 4K images
uses the H.264 video coding format.
SD card Inserting an SD card (optional accessory) into the
(4K) unit enables recording 4K video in H.264 format to
the SD card.
Since data recorded to the SD card cannot be
played back on the Web screen, play it back
after downloading it to a personal computer or
transferring it to an FTP server.
USB(4K) You can use this unit as a 4K Web camera.
The camera can also be controlled from a personal
computer.
● When the unit is used as a 4K-compatible Web
camera, the frame rate will be fixed at 5fps.
HDMI(4K) 4K video is output to an external monitor
connected via an HDMI cable.
Factory settings: IP
Notes
● When the priority mode is changed, the operation of
the mode before the change is forcefully stopped.
● The "IP", "SD card", "IP(4K)" and "SD card(4K)"
mode require various settings to be configured from
a personal computer connected via the network.
● This unit cannot display H.264 format 4K images
on the Live screen. To display 4K images, use an
external device or external software that supports
4K images.
(continued)
„ Clock settings tab [Date&Time]
„
Configure the settings for the clock.
Set the clock using any of the three methods: "PC
synchronization", "NTP", and "Manual".
z setup
„
Display
Set the display of the date and time on the Live screen.
Factory settings: Off
PC synchronization
If you click the [Execute] button, the settings are
configured by synchronizing the unit to the date and time
of the connected personal computer.
Note
● The time zone of the personal computer is not
reflected on the unit.
Set the time zone on the unit.
NTP
If you click "NTP>>", the settings screen for the NTP
server appears. (page 98)
Manual ‑ Date/time
Configure the settings for the month, day, and year and for
the hour, minute, and second.
Notes
● The data display format is Mmm/DD/YYYY.
● The time is in the 24-hour format.
Manual ‑ Time zone
Selects the time zone according to the region where the
camera is being used.
Factory settings:
(GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon,
London
67