Panasonic AW-UE70WP Operating Instructions Manual page 73

Web screen configurations
The range of H.264 bit rates that can be specified varies
depending on the resolution.
[When 59.94 Hz has been set as the unit's frequency]
Image capture
Frame rate
size
30fps
3840×2160 15fps
5fps
1920×1080 60fps
5fps, 15fps,
1920×1080
30fps
1280×720 60fps
5fps, 15fps,
1280×720
30fps
5fps, 15fps,
640×360
30fps
5fps, 15fps,
320×180
30fps
[When 50 Hz has been set as the unit's frequency]
Image capture
Frame rate
size
25fps
3840×2160 12.5fps
5fps
1920×1080 50fps
5fps, 12.5fps,
1920×1080
25fps
1280×720 50fps
5fps, 12.5fps,
1280×720
25fps
5fps, 12.5fps,
640×360
25fps
5fps, 12.5fps,
320×180
25fps
Image quality
Select the image quality for H.264 images.
Setting value:
Motion priority Mode giving priority to image motion.
Image quality Mode giving priority to image quality.
priority
Factory settings: Motion priority
Note
● This setting is only enabled when [Transmission
priority] is set to [Constant bit rate] or [Best effort].
(continued)
H.264 bit rate
51200kbps fixed
40960kbps fixed
32768kbps fixed
16384kbps to 24576kbps
3072kbps to 14336kbps
3072kbps to 14336kbps
2048kbps to 8192kbps
1024kbps to 4096kbps
512kbps to 4096kbps
H.264 bit rate
51200kbps fixed
40960kbps fixed
32768kbps fixed
16384kbps to 24576kbps
3072kbps to 14336kbps
3072kbps to 14336kbps
2048kbps to 8192kbps
1024kbps to 4096kbps
512kbps to 4096kbps
Transmission type
Select the transmission format for H.264 images.
Setting value:
Unicast port Up to 14 users can access a single camera at
(AUTO) the same time.
[Unicast port (Image)] and [Unicast port
(Audio)] will be configured automatically when
images and audio are sent from the camera.
We recommend selecting the [Unicast port
(MANUAL)] setting when the port number
transmitting the H.264 images does not need to
be fixed (e.g., during use within a network).
Unicast port Up to 14 users can access a single camera at
(MANUAL) the same time.
[Unicast port (Image)] and [Unicast port (Audio)]
must be configured manually when images and
audio are sent from the camera.
When transmitting H.264 images via the
Internet, configure a fixed transmission port for
the broadband router (hereafter referred to as
"router") (page 93). For details, refer to the
operating instructions for the router.
Multicast An unlimited number of users can access a
single camera at the same time.
When transmitting H.264 images via multicast,
enter the [Multicast address], [Multicast port],
and [Multicast TTL/HOPLimit].
Factory settings: Unicast port (AUTO)
Note
● For details on the maximum number for
simultaneous access, see page 58.
73