Panasonic AW-UE70WP Operating Instructions Manual page 27

Basic operations
●
Freezing images during preset playback
(FREEZE DURING)
1
Press the [MENU] button on the AW‑RP50.
The [MENU] button lights, and the [PRESET MEMORY/
MENU] buttons become selectable.
2
Press the [9 (SETUP)] button in the [PRESET
MEMORY/MENU] area.
The button lights, and the SETUP menu appears on the
LCD panel.
3
Turn the F1 dial to select "FUNCTION", then
press the F1 dial.
4
Turn the F1 dial to select "FREEZE DURING",
then press the F1 dial.
"Off" or "On" appears on the bottom right (F2 area) of the
LCD panel.
5
Turn the F2 dial to select "Off" or "On", then
press the F2 dial.
Off: Do not freeze the current preset playback images.
On: Freeze the current preset playback images.
(continued)
●
Optical image stabilization function
setting
1
Press the [MENU] button on the AW‑RP50.
The [MENU] button lights, and the [PRESET MEMORY/
MENU] buttons become selectable.
2
Press the [9 (SETUP)] button in the [PRESET
MEMORY/MENU] area.
The button lights, and the SETUP menu appears on the
LCD panel.
3
Turn the F1 dial to select "FUNCTION", then
press the F1 dial.
4
Turn the F1 dial to select "I.S.", then press the
F1 dial.
"Off", "MODE_1" or "MODE_2" appears on the bottom
right (F2 area) of the LCD panel.
5
Turn the F2 dial to select "Off", "MODE_1" or
"MODE_2", then press the F2 dial.
Off: Image stabilization function not used.
MODE_1: Image stabilization function used (optical,
2-axis compensation)
MODE_2: Image stabilization function used
(optical+electronic, 4-axis compensation)
Notes
● "MODE_2" cannot be selected when HDR is "Low"
or "High".
● "MODE_2" cannot be selected when the Priority
Mode (page 46, page 67) is "IP(4K)", "SD
card(4K)", "USB(4K)", or "HDMI(4K)".
● When "MODE_2" is selected, the view angle
changes to set aside image pixels for use during
compensation.
● When "MODE_2" is selected, display of the output
image is delayed compared to the actual image.
● Although the image stabilization of "MODE_2"
(hybrid of optical and electronic compensation)
produces stronger compensation than "MODE_1",
depending on the shooting conditions, it may
not be able to differentiate between movement
of the subject and movement of the unit as it
performs compensation (electronic) on movement
detected in the video signal. Therefore, erroneous
compensation may occur.
● The image stabilization setting cannot be changed
while data is being written to the SD card.
27