Table of Contents
Advertisement
Chapter 2 — Getting Started
Dual Displays
With Windows system, you may use an external monitor simultaneously with your notebook's LCD. You
may also use the external monitor only and disable the LCD or only use the LCD. To do this you may first
need to enable the multiple display settings in Windows 98.
1.
Open the Control
Panel.
2.
Double-click
Display. The
Display
Properties
window opens.
3.
Click the
Settings tab.
4.
Click the
Advanced
button.
5.
Choose SD3
Display.
6.
Click the LCD
button or external
monitor button
These options are described below
Single
Mirror
Note: Light or dark dots may appear on the LCD due to
technical limitations of LCD manufacturing. This will
not effect normal operation of the LCD.
.
You can choose which device to apply as the
Primary display.
In Single mode, the video display hot key
combination is available—you can cycle the video
output by pressing the Fn + F5 keys.
In Mirror mode, the video display hot key
combination is available—you can cycle the video
output by pressing the Fn + F5 keys.
If the external CRT is connected, the display on the
LCD and the CRT is the same.
Advertisement
Table of Contents
