Table of Contents
Advertisement
Field
1st Boot Device
2nd Boot Device
3rd Boot Device
S.M.A.R.T. for Hard
Disks
Bootup Num-Lock
Display Expansion
Support
Password Check
Share Memory Size
Setting
1st Boot Device default is CD-ROM.
CD-ROM
2nd Boot Device default is USB FDD.
USB FDD
3rd Boot Device default is IDE-0.
IDE-0
Disabled
Only S.M.A.R.T. Hard Disks are
supported. The default is Enabled.
Enabled
Off
Use this field to initially disable the
NumLock feature of the internal
On
keyboard when the notebook starts.
The default is Off.
Disabled
If you are using DOS or a 640 x 480
resolution to run windows, the display
will not fill the entire screen. Enable
Enabled
this mode to expand the display to the
entire screen. The default is Enabled.
Setup
The default value is Setup, which
specifies that a password is only
required to enter the setup utility.
Always
If Always is selected, the password is
required when the system is booted up
or resuming from a suspend-to-disk.
8MB
This field displays the amount of
© 2003 AVERATEC, Inc.
Using the BIOS Setup Utility —Advanced CMOS Setup
Function
Advertisement
Table of Contents
