Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Autotek Mean Machine MM1-1000D
Summary of Contents for Autotek Mean Machine MM1-1000D
- Page 1 EVOLUTION OF POWER MEAN MACHINE AMPLIFIERS MM404 / MM1000.1D / MM1500.1D...
-
Page 2: Table Of Contents
AMPLIFIERS Autotek is proud to introduce the finest high end car audio products available and would like to thank you for your continued support. The Mean Machine Series products have been designed to a very high level of performance, with features unavailable in any other products. -
Page 3: General Installation Procedure
GENERAL INSTALLATION PROCEDURE System Design The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link. Please remember that higher power systems are not necessarily useful purely for high sound pressure levels, but also to establish a headroom capability, to reproduce musical peaks cleanly without distortion. -
Page 4: Amplifier Feature Descriptions
Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged All Autotek amplifiers feature a comprehensive diagnostic system, with speaker lead operation except the mono amps which are capable of 4, 2 and 1-Ohm loads. -
Page 5: Mm404 / 4 Channel Amplifier Applications
Crossover frequency control checklist: Here we show how to use the 4 channel amplifiers as full range 2 or 3 channel Channels 1/2: units by taking advantage of the mono bridging capability of all Autotek - HI PASS: N/A amplifiers. -
Page 6: Mm1000.1D / Mm1500.1D / 1 Channel Amplifiers Applications
MM1000.1D / MM1500.1D / MONO AMPLIFIER APPLICATIONS Basic application SINGLE AMP INSTALLATION PROCEDURE: 4. Connect a 2 gauge ground cables directly to chassis ground with in 36” of the 1. Connect the amp LINE INPUTS to the Radio/CD player full range or mono amp. - Page 7 MM1000.1D / MM1500.1D / MONO AMPLIFIER APPLICATIONS Master / Slave Application DUAL AMP INSTALLATION PROCEDURE: 5. Connect two 2 gauge ground cables directly to chassis ground with in 36” of 1. Connect the amp LINE INPUTS to the Radio/CD player full range or mono the amp.
-
Page 8: Features And Specifications
Bridged Protect Optional Connection... -
Page 9: Setting Up Systems After Installation For Best Performance
SETTING UP SYSTEMS AFTER INSTALLATION FOR BEST PERFORMANCE MM404 General: At this point you are ready to get more specific on the settings for your amplifier. High Pass: -When in Hi Pass operation, this setting acts as a low frequency cut off for your system reproduction. The point that you set it at cuts off any frequencies from reproduction beyond this point. -
Page 10: Troubleshooting And Diagnostics
The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Autotek amplifiers The diagnostic system will shut down the amplifier, until reset by turning the head unit off, and back on. This state of affairs will be indicated by the front panel PROTECT LED lighting up under the following conditions: 1 - A sort circuit on the loudspeaker leads. -
Page 11: Product Warranty
MEAN MACHINE AMPLIFIERS Maxxsonics Limited Warranty As the manufacturer of Maxxsonics, Autotek, Crunch, MB Quart and Hifonics car audio products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Year from date of purchase.