McGREGOR MEH1430A Original Instruction Manual page 10

Safety Information
Important - Please read these instructions fully before starting assembly
Operating Safety (continued)
OPERATION
• Operate the machine only in daylight or in good
artificial light. Do not expose the product to rain or wet
conditions. Avoid using the product in bad weather
conditions especially when there is a risk of lightning.
• Never operate the machine with defective guards
or shields, or without safety devices, for example
deflectors and/or grass collector, in place.
• Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
• Before use check the controls and correct operation of
the product.
• Before using the product or after any impact, check for
signs of wear or damage and repair as necessary.
• Always disconnect the product from the power supply
(i.e. remove the plug from the power supply or the
battery pack)
– Whenever leaving the product unattended;
– Before clearing a blockage;
– Before checking, cleaning or working on the product
– After striking a foreign object;
– Whenever the product starts vibrating abnormally.
• Always ensure that the air vents are kept clear of debris.
• Never use replacement parts or accessories not
provided or recommended by the manufacturer.
• Position the cord so that it will not be caught by the
cutting attachment during operation.
• Disconnect from the power supply when the cord
becomes damaged or tangled.
10 Customer Helpline 0345 605 2063