Table Of Contents - Autotek M1400.4 User Manual

MEAN MACHINE AMPLIFIERS
Autotek is proud to introduce the finest high end car audio products available and would like to thank you for your continued support.
The Mean Machine Series products have been designed to a very high level of performance, with features unavailable in any other products.
All of the amplifiers have variable crossovers built in, with added touches such as subsonic filter (mono amps), bass equalization and a bass
remote control module (mono amps) that allows bass control from with in reach of the drivers seat.
To insure years of listening pleasure, all amplifiers have a built in diagnostic mode that will detect shorted speaker leads, low impedance,
dangerous high temperatures, DC shorts and will shut down the amp to help prevent serious damage.
INDEX
General Installation Procedures.....................................................................................................................................................................................1
- Mounting the amplifier / Wiring Requirements
Amplifier Feature Descriptions.......................................................................................................................................................................................2
M1600.2 / M3200.2 / 2-CHANNEL AMPLIFIER APPLICATIONS...................................................................................................................................3
- Full range stereo / Full range mono / 2 way active with mono bass using two 2 channel models
M1000.4 / M1400.4 / M2000.4 / 4-CHANNEL AMPLIFIER APPLICATIONS...............................................................................................................4-5
- Full range stereo / 3 channel full range system
M1500.1D / M2500.1D / M4000.1D / 1-CHANNEL AMPLIFIER APPLICATIONS..........................................................................................................6
- Basic mono amplifier application
Features and Specifications...........................................................................................................................................................................................7
Setting Up Systems After Installation For Best Performance.....................................................................................................................................8
Troubleshooting and Diagnostics..................................................................................................................................................................................9
Product Warranty...........................................................................................................................................................................................................10
ATK2/3X
2-Way / 3-Way Active Crossover with Remote Bass Control
- 2 & 4 channel inputs / Sub-Input for receivers with Sub Outputs / Bass Remote offers 12dB Bass Boost / Adjustable Level Output to 8.5 volts /
- 180 degree Phase Shift / 45Hz Bass Boost with Quasi-Parametric EQ / Level (gain) adjustments for front, rear and sub outputs / 2nd Order Butterworth
- Hi-Pass for front and rear channels
7007
4-Band EQ / 9 Volt Line Driver Signal Processor
- 4 band EQ and Line Driver / Dual Inputs with Level Matching / DIN, ISO Mount chassis / EQ controls with 12dB of Bass Boost - cut 45Hz Sub Bass - 120Hz
- Mid Bass - 2.2KHz Mid Range - 12KHz Treble / Master Volume and Subwoofer Volume / Front to Rear dual amp Fader / High Pass F/R Crossover - 12dB
Slope / Selectable Subwoofer Output - 50Hz - 80Hz - 120Hz at 18dB Slope
Check out our videos of new products,
events and technical tutorials at
www.youtube.com/maxxsonicsusainc
The contents of this manual may not be reproduced or copied with out the
written consent of MAXXSONICS USA, Inc.
Available Optional Equipment
PAGE