Audiovox D1210 Operating Instructions Manual page 17

0
CAR Installation
3
1
Figure 1
Top Rings
Mounting
Bag
Lower Rings
Figure 2
Note: Detach the two speakers from the main unit, only use headphones.
2) Car installation between two seats (Figure 2)
1. Take one of the supplied straps from the storage bag and
connect the latch to the top metal ring on the mounting bag.
Wrap the strap around the base of one the headrests. Attach
the "S" hook to the same top metal ring. Repeat this process
for the other side (Passenger Seat).
2. Take another strap and connect the latch to the lower metal
ring on the back of the bag. Attach the "S" hook to the same
ring after looping the strap around the rail located beneath
the seat track. Avoid moving parts of the seat mechanism.
Repeat this process for the other side. In some vehicles, it
may be necessary to attach the "S" connector to the rail
directly, as it may not be long enough to reach back to the
ring.
3. Adjust all the straps tightly so that the bag is secure.
4. Plug one end of the cigarette lighter adapter into the DC 12V
input; then plug the other end into the cigarette lighter socket.
CAR Installation
Figure 2
0
3
2