Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ATEN VS-134
Summary of Contents for ATEN VS-134
- Page 1 Video Splitter USER MANUAL VS-134...
-
Page 2: Fcc Information
FCC Information NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 3: Package Contents
Copyright © 1999–2008 ATEN International Co., Ltd. Manual Part No. PAPE-XXXX-XXXX Manual Date: 2008-06-11 ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners. - 3 -... - Page 4 Overview The VS-134 Video Splitter is a boosting device to duplicate the video signal from one source to four outputs, and is ideal for any monitor using analog signals. The VS-134 also extends the transmission distance up to 65 m (210 feet) making it excellent for public broadcast systems.
- Page 5 Features Duplicates Video Signals to Four Outputs Long Distance Transmission - Up to 65 m (210') Daisy Chainable Supports 350 MHz Bandwidths Supports XGA, VGA, SVGA, and Multisync Monitors High Resolution Video - Up To 1920 x 1440 Supports one XGA Port (Video Out 1) DDC Compatible* If you connect a DDC type monitor to Video Out 1, all other monitors must be able to support the highest video...
-
Page 6: Hardware Requirements
Hardware Requirements One or more XGA, SVGA, VGA, and/or Multisync compatible analog monitor(s) with standard PC high density cables having 15 pin D type male connectors. Computer with one XGA, SVGA, VGA, and/or Multisync analog video port having a standard PC 15 pin D type female connector. -
Page 7: Front View
Front View Component Description Power LED Lights to indicate the unit is connected to a power source and is receiving power. Power Switch - 7 -... -
Page 8: Rear View
Rear View Component Description Video In Port The VGA cable that connects the unit to the computer's video output port plugs in here. Video Out The monitors that display the video signal from Ports the computer plug in here. - 8 -... -
Page 9: Installation
Installation Standalone Installation Setting up the Video Splitter is simply a matter of plugging in the cables. Refer to the diagram as you follow the step by step directions below: 1. Make sure that the computer and monitors you are using for the installation are all powered Off. - Page 10 Cascading To provide video display for more monitors, additional VS-134s can be cascaded. Use a high density HDB-15 male/female video extender cable (Part No. 2L-2401), to connect any available Video Out port on the higher level Video Splitter to the Video In port of the lower level Video Splitter.
-
Page 11: Specifications
Specifications Function Specification Connectors Input 1 x HDB-15 Male Output 4 x HDB-15 Female LEDs 1 Power Indicator VGA Bandwidth (-3db) 350 MHz VGA Res/Vert Freq. 1920 x 1440 @80 Hz Signal Type VGA, XGA, SVGA, UXGA, Multisync Cable Distance 65 m (210ft.) (max.) Power Consumption AC 9V, 200mA (max.) -
Page 12: Limited Warranty
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and specially disclaims its quality, performance, merchantability, or fitness for any particular purpose.