Panasonic KX-TGF352 Operating Instructions Manual page 52

Useful Information
Problem
Noise is heard, sound cuts in and
out.
The handset or base unit does
not ring.
I cannot make a call.
I cannot make long distance calls. R Make sure that you have long distance service.
Caller ID/Talking Caller ID
Problem
Caller information is not displayed. R You must subscribe to Caller ID service. Contact your phone
Caller information is displayed or
announced late.
Caller information is not
announced.
The caller list/incoming phone
numbers are not edited
automatically.
I cannot dial the phone number
edited in the caller list.
Time on the unit has shifted.
52 For assistance, please visit http://shop.panasonic.com/support
TGF35x(en)_0303_ver101.pdf 52
Cause/solution
R You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R The ringer volume is turned off. Adjust the ringer volume
(page 16, 30).
R Silent mode is turned on. Turn it off (page 16, 34).
R The dialing mode may be set incorrectly. Change the setting
(page 14).
Cause/solution
service provider for details.
R If your unit is connected to any additional telephone equipment
such as a Caller ID box or cordless telephone line jack, plug the
unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R The name display service may not be available in some areas.
Contact your phone service provider for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
R Depending on your phone service provider, the unit may display
or announce the caller's information at the 2nd ring or later.
R Move closer to the base unit.
R The ringer volume is turned off. Adjust the ringer volume
(page 30).
R The Talking Caller ID feature is turned off. Turn it on (page 30).
R The number of rings for the answering system is set to "2
rings" or "Toll saver". Select a different setting (page 45).
R If the base unit and another handset are having an intercom
call, your handset does not announce caller information.
R The Caller ID number auto edit feature is turned off. Turn it on
and try again (page 31).
R You need to call back the edited number to activate Caller ID
number auto edit.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance "1" or the area code
is missing). Edit the phone number with another pattern
(page 39).
R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to "Manual" (off) (page 30).
2016/03/03 12:12:52