Panasonic NR-BV360AS Operating Instructions Manual page 13

How to clean the refrigerator
Removing PC glass tray for cleaning
 Removing
1. Unhook the
protrusion at the
back by lifting
it upward and
pulling the tray
outward until removing.
 Attaching
2. Push the tray until it reaches the end.
Remark:
● When removing tray above vegetable
case, please pull out the vegetable case
first and then follow to remove the tray as
above details.
● In case of attaching the tray and it does not
lock, make sure that you did not attach the
wrong tray.
● Make sure that you don't attach the upper
side of the tray downward.
● Two PC Glass trays can be used
alternatively, but Glass tray crisper
should only be attached right above
vegetable case.
 Removing
1 . Tilt up the pan water evap a bit and
then lift it upward until the pan water
evap hole unlocks from the pan water
evap hook.
2 . Pull the pan water evap until it touches
with the evap pipe then carefully take it
out under the evap pipe.
Removing pan water evap for cleaning
Removing FC glass tray for cleaning
 Removing
1 . Unhook the
protrusion at the
back by lifting it
upward and pulling
the tray outward
until removing.
 Attaching
2 . Push the tray until it reaches the end.
Remark:
 In case of attaching the tray and it does
not lock, make sure that you did not
attach the wrong tray.
 (In case of 1-2 Glass tray) In order to
expand storage space inside Freezer
room, the front tray can be removed and
stacked with the other tray.
 Attaching
1 . Insert the pan water evap under the evap
pipe.
2 . Insert the pan water evap hole into the
hook pan water evap as well as press-
fitting both sides.
Remark: Check the status to make sure evap
pipe does not touch the pan water evap.
Hook pan
water evap
Evap pipe
13