Supero SUPERSERVER 1026TT-TF User Manual page 3

Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 1026TT-
TF/1026TT-IBXF/1026TT-IBQF. Installation and maintenance should be performed
by experienced technicians only.
The SuperServer 1026TT-TF/1026TT-IBXF/1026TT-IBQF is a 1U Twin (two server-
boards in a 1U chassis) rackmount server based on the SC809TQ-1200B chassis
and two Super X8DTT-F/X8DTT-IBXF/X8DTT-IBQFserverboards.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X8DTT-F/X8DTT-IBXF/
X8DTT-IBQF serverboard and the SC809TQ-1200B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 1026TT-
TF/1026TT-IBXF/1026TT-IBQF into a rack and check out the server confi guration
prior to powering up the system. If your server was ordered without the processor
and memory components, this chapter will refer you to the appropriate sections of
the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii