Table of Contents
Advertisement
Available languages
Available languages
OSCILLATING MULTI-TOOL
DWE314, DWE315
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
V
UK & Ireland
V
Type
Power intput
Power output
Oscillating frequency
min
Oscillating angle
Weight
Noise values and vibration values (triax vector sum) according to EN62841:
L
(emission sound pressure
dB(A)
PA
level)
L
(sound power level)
dB(A)
WA
K (uncertainty for the
dB(A)
given sound level)
Vibration emission value a
= m/s
h
Uncertainty K =
m/s
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
WALT one of the
e
DWE314
DWE315
230
230
AC
230/115
230/115
AC
1
1
W
250
300
W
170
170
-1
0–22000
0–22000
1.6˚
1.6˚
kg
1.5
1.5
89
89
100
100
3
3
2
18.4
18,4
2
8.7
8.7
EC-Declaration of Conformity
Machinery Directive
Oscillating Multi-Tool
DWE314, DWE315
D
WALT declares that these products described under Technical
e
Data are in compliance with: 2006/42/EU, EN62841-1:2015,
EN62841-2-4:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D
WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
04.03.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EngLIsh
WALT at
e
WALT.
e
19
Advertisement
Table of Contents
