Advertisement
Safety Information
Never use the Transmitter or Receiver on live circuits of
more than DC48V or it will result damage.
Never use the Transmitter, Receiver or test wire if they are
damaged. Inspect the cases and test leads for damage before
use.
Disconnect unused test leads and connectors from the
Transmitter when testing telephone circuits.
Never open the case except to change the battery or the fuse;
no user-serviceable parts are inside.
Turn off the Transmitter or Receiver and disconnect all test
leads before replacing the battery.
Use only a 9V battery, properly installed in the case, to operate
the Transmitter and Receiver.
If this equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
4
Advertisement
